Daqo New Energy Begins Pilot Production at New Phase 4A Polysilicon Production Facility in Xinjiang

SHIHEZI, China, Sept. 16, 2019 -- Daqo New Energy Corp. (NYSE: DQ) ("Daqo New Energy", the "Company" or "we"), a leading manufacturer of high-purity polysilicon for the global solar PV industry, today announced that it had begun pilot production at its new Phase 4A polysilicon production facility in Shihezi, Xinjiang. The Company expects Phase 4A to gradually ramp up to full production capacity and to increase its total annual production capacity to 70,000 MT by the end of this year.

Mr. Longgen Zhang, CEO of Daqo New Energy, commented, "We are very
excited to have successfully completed the construction and installation
of Phase 4A months ahead of schedule. I would like to thank our entire
Xinjiang team for their hard work and dedication to make this possible.
We have already started pilot production at Phase 4A and expect to ramp
up production to full capacity by the end of this year, which will
increase our total annual polysilicon production capacity to 70,000 MT.
In addition, with greater economies of scale, higher manufacturing
efficiency, and cutting-edge equipment and process, we expect the total
cost of polysilicon production at our Xinjiang facilities to decrease to
approximately US$6.80/kg in the first quarter of 2020."

"We have seen that mono-crystalline solar technology is rapidly
expanding market share and accounting for an increasingly significant
portion of capacity expansion projects of our solar wafer customers. We
believe that mono technology will account for over 80% of the global
PV market by the end of 2020. The supply of ultra-high-quality
mono-grade polysilicon still lags behind the growing demand. As a
result, mono-grade polysilicon is being sold at a significant premium
over multi-grade polysilicon. We believe that product quality is just as
important as cost structure to a polysilicon producer's profitability,
if not more."

"As one of the first-tier high-quality polysilicon providers, we sell
approximately 85% of our products to mono customers and expect
to increase this percentage to 90% after Phase 4A is fully ramped up. At
the same time, we are also working closely with some key customers to
test our products for potential N-type mono wafer applications, which
requires even higher quality polysilicon when compared to
standard P-type mono wafer. We are aiming to be market-ready and produce
approximately 40% of our total polysilicon products for potential
N-type applications in 2020."

"With the solar industry rapidly approaching grid parity,
the successful completion of Phase 4A facility will provide us with
added high-quality polysilicon capacity which will allow us to benefit
from the sustainable growth of the global solar PV market. It also
demonstrates our strong execution capabilities, deep understanding of
our customers' needs, and our long-term commitment to the solar PV
industry. We've made it a priority to address climate change for the
next generation and to make solar PV one of the cleanest, most
sustainable, and most cost-effective sources of energy."

Safe Harbor Statement

This announcement contains forward-looking statements. These
statements are made under the "safe harbor" provisions of the U.S.
Private Securities Litigation Reform Act of 1995. These forward-looking
statements can be identified by terminology such as "will," "expects,"
"anticipates," "future," "intends," "plans," "believes," "estimates" and
similar statements. Among other things, the quotations from management
in this announcement, as well as Daqo New Energy's strategic and
operational plans, contain forward-looking statements. The Company may
also make written or oral forward-looking statements in its reports
filed or furnished to the U.S. Securities and Exchange Commission, in
its annual reports to shareholders, in press releases and other written
materials and in oral statements made by its officers, directors or
employees to third parties. Statements that are not historical facts,
including statements about the Company's beliefs and expectations, are
forward-looking statements. Forward-looking statements involve inherent
risks and uncertainties. A number of factors could cause actual results
to differ materially from those contained in any forward-looking
statement, including but not limited to the following: the demand for
photovoltaic products and the development of photovoltaic technologies;
global supply and demand for polysilicon; alternative technologies in
cell manufacturing; the Company's ability to significantly expand its
polysilicon production capacity and output; the reduction in or
elimination of government subsidies and economic incentives for solar
energy applications; and the Company's ability to lower its production
costs. Further information regarding these and other risks is included
in the reports or documents that the Company has filed with, or
furnished to, the U.S. Securities and Exchange Commission. All
information provided in this press release is as of the date hereof, and
the Company undertakes no duty to update such information or any
forward-looking statement, except as required under applicable law.


Daqo New Energy Corp. (NYSE: DQ) ("Daqo" or the "Company") is a
leading manufacturer of high-purity polysilicon for the global solar PV
industry. Founded in 2008, the Company is one of the world's lowest cost
producers of high-purity polysilicon. Daqo's highly-efficient and
technically advanced manufacturing facility in Xinjiang, China
currently has a nameplate annual polysilicon production capacity of
35,000 metric tons, and the Company is ramping up the new Phase 4A
expansion project which is expected to increase its annual polysilicon
production capacity to 70,000 metric tons by the end of 2019.

For more information, please visit http://www.dqsolar.com


Add Comment